SpiderCommercial Facade Cleaning
Brick, stone, EIFS, and metal elevations washed from the air on mid- and high-rise commercial buildings across NYC and NJ.
Commercial Drone Facade & Window Cleaning — NYC, NJ & PHL
Buildings cleaned
from the AIR.
No scaffolding. No swing stage. No sidewalk shed. SpiderJet flies tethered cleaning drones up the face of your building for commercial facade and window cleaning across NYC, Jersey City, Newark, and the greater NY/NJ metro area — safer and faster than traditional access methods.
40–60%Lower cost vs. scaffolding
2 vs 8Crew size on site
150ftReach without a lift
4000 PSIRemove hard stains
FAA Part 107 LicensedCertified Operators
InsuredGeneral Liability Coverage
Why Drone Cleaning
The smarter way to clean height.
Lower Access Costs
Cuts reliance on scaffolding, lifts, and swing-stage setup.
Reduced Work-at-Height Risk
Keeps crews off ladders, lifts, and rooftops for the duration of the job.
Faster Mobilization
Less heavy equipment on site means quicker setup and quicker teardown.
Minimal Site Disruption
Built to reduce interruptions to tenants, guests, and building operations.
Consistent Coverage
Planned, elevation-by-elevation passes for even, documented results.
Fully Insured Operators
FAA-certified pilots and licensed, insured cleaning technicians.
The Hardware
Meet our fleet.
Every SpiderJet operator flies the Sherpa heavy-lift spray drone — purpose-built for tethered, ground-fed exterior cleaning. A reinforced carbon-fiber frame and integrated wash-fluid line keep it stable on real jobsites, not just calm-day demos.
The Hardware
Engineered for redundancy.
Dual battery packs mean a single cell issue doesn't mean a dropped drone over your building. Flight controller, ESCs, and every connection point are inspected between jobs — operating over occupied buildings leaves no margin for hardware failure.
The Hardware
Scaled for bigger jobs.
Apellix-class heavy-lift platforms join the fleet for large industrial and refinery work — added tank capacity and lift power when a job outgrows the Sherpa.
Our Services
Commercial facade & window cleaning for every elevation.
Commercial Window Cleaning
High-rise glass and curtainwall cleaned floor by floor from ground level, with no lift to book.
Industrial Cleaning
Stacks, tanks, silos, and clad exteriors washed without parking a crane on site.
Roof Cleaning
Debris removal and washdown for hard-to-reach rooflines and drainage systems.
Solar Panel Cleaning
Dust and grime removal to restore panel efficiency across rooftop and ground-mount arrays.
Drone Inspection & Imaging
High-resolution aerial imaging of roofs, seams, and elevations with a documented condition report.
Instant Estimate
Ballpark your building in 30 seconds.
Enter the address. We pull the building's height and footprint from public city records and give you a price range for drone cleaning, before anyone has to visit.
Your estimate appears here
Most NYC and Philadelphia buildings are found automatically. Elsewhere we may ask for the number of floors.
Gallery
See it in action.
Curtain-Wall Glass Cleaning
Window Cleaning
Industrial Tank Cleaning
Warehouse Exterior Washing
Solar Panel Cleaning
High-Rise Facade Cleaning
Tethered Cleaning Drone
Glass Tower Window Washing
Areas of Coverage
Serving NYC, NJ & beyond.
SpiderJet provides commercial drone facade and window cleaning across the New York City and New Jersey metro area, with select projects further afield. Contact us to confirm project fit and scheduling for your building.
- Commercial office and mixed-use buildings
- Multifamily and apartment properties
- Hotels and hospitality
- Industrial and manufacturing facilities
NYC & Jersey City / Newark
Primary service area — Manhattan, Brooklyn, Jersey City, Newark, and the surrounding NY/NJ metro.
Philadelphia
Secondary service area for commercial facade and window cleaning projects.
Atlantic City
Tertiary service area — contact us to confirm scheduling.
Before Project Start
Permits & approvals, lined up before we fly.
Every city regulates a drone cleaning job a little differently. Here is what each market requires before work begins — SpiderJet coordinates and files it as part of project planning.
| Requirement | |||
|---|---|---|---|
| Drone takeoff & landing permit | Required NYPD and NYC DOT permit | No state permit Property-owner consent | No city permit Property-owner consent |
| FAA airspace authorization | LaGuardia, JFK and Newark Class B airspace | Near Newark, Teterboro, Morristown, Trenton and Atlantic City | PHL Class B and Northeast Philadelphia airspace |
| Street & sidewalk use | NYC DOT (OCMC) permit | Town, county or NJDOT permit | Streets Department street occupancy permit |
| Historic building review | Landmarks Preservation Commission | Local historic preservation commission | Philadelphia Historical Commission |
| Wash-water runoff | NYC DEP: kept out of storm drains | Town stormwater rules and local sewerage authority | Water Department, Industrial Waste Unit |
| Typical lead time | 30+ days (NYPD permit) | Varies by town | Several weeks for street permits |
Download full checklist (PDF)
Or one location: New York City · New Jersey · Philadelphia
Requirements vary by site and change over time. SpiderJet confirms and files what your project needs during quote planning. General information, not legal advice. Last reviewed October 2026.
New York City
- NYPD drone takeoff & landing permitRequired for every takeoff and landing in the city. Reviewed by NYPD and NYC DOT and filed at least 30 days before the first flight.
- FAA airspace authorizationMost of the city sits in LaGuardia, JFK and Newark Class B airspace, authorized per job through LAANC or FAA DroneZone.
- Community noticeWhen the drone records video, affected community boards are notified and notices are posted near each takeoff and landing site.
- NYC DOT sidewalk & curb permitFor the van, cones and barriers at the curb or on the sidewalk (Office of Construction Mitigation and Coordination).
- Landmarks Preservation CommissionFor designated landmarks and historic districts: approval of the cleaning method, usually with a test patch.
- Wash-water containmentNYC DEP rules keep wash water out of storm drains, so runoff is captured for proper disposal.
- Cleaning-product complianceMold and algae treatments that are registered pesticides follow NYS DEC applicator rules.
- Property-owner authorizationWritten access agreement for the roof, grounds and staging areas.
New Jersey
- Property-owner authorizationWritten permission to take off and land on the property. New Jersey has no statewide drone launch permit.
- FAA airspace authorizationNear Newark, Teterboro, Morristown, Trenton, Atlantic City and Philadelphia airports, plus temporary flight restrictions such as Bedminster.
- Street opening / obstruction permitWhen the van or equipment occupies a town street or sidewalk. County roads go through the county engineer, state highways through NJDOT.
- Local ordinance checkEach town's code is reviewed for launches from public property and quiet hours for night and weekend work.
- Historic preservation commissionCertificate of Appropriateness for exterior work in local historic districts such as Jersey City, Hoboken and Newark.
- Stormwater complianceTown ordinances keep wash water out of storm drains, so runoff is captured and disposed of with the local sewerage authority.
- Cleaning-product complianceRegistered mold and algae treatments follow NJDEP Pesticide Control Program rules.
Philadelphia
- Property-owner authorizationPennsylvania law bars cities from regulating drone flights, so there is no city drone permit. We launch from the client's property with written permission.
- FAA airspace authorizationMost of the city is under PHL Class B airspace and Northeast Philadelphia Airport has Class D. Stadium flight restrictions apply on game days.
- Streets Department street occupancy permitFor equipment, sidewalk or lane closures through the Right-of-Way Unit. A police detail is required if a travel lane is closed.
- Philadelphia Historical CommissionMasonry cleaning on designated buildings and in historic districts is reviewed, usually with an approved test sample.
- Water Department approvalCity code prohibits pollutants in storm inlets; sewer discharges need approval from PWD's Industrial Waste Unit.
- Cleaning-product complianceRegistered mold and algae treatments follow Pennsylvania Department of Agriculture applicator rules.
FAQ
Common questions.
What types of buildings do you clean with drones?
We focus on commercial buildings, multifamily properties, hotels, offices, and industrial facilities.
Do you replace scaffolding or lifts entirely?
On most jobs, yes — access requirements are confirmed during your site quote, since a small number of projects still call for traditional equipment.
Can you work nights and weekends?
Yes — we offer flexible scheduling, including nights and weekends, to minimize disruption to tenants and building operations. Availability is confirmed during quote planning.
Do I need any special permits for a drone cleaning project?
Our pilots are FAA Part 107 certified and every aircraft is FAA-registered. Depending on the site, we also secure airspace authorization near controlled airports and any required local permits (street closures, building access approvals). We handle this coordination as part of project planning — you won't need to pull permits yourself..
How do I request a quote?
Send your building location, surface type, approximate size, and timeline through the contact form below.
What is the quality of the cleaning?
Drone cleaning uses controlled water pressure (up to 4000 PSI) with elevation-by-elevation passes, giving even, documented coverage comparable to traditional access methods on suitable surfaces. For heavy buildup, hard stains, or intricate detailing, our team reviews surface type and condition during quote planning to confirm drone cleaning is the right fit — some jobs may call for a hybrid approach.
How long does a typical project take?
Our drones clean 300+ square feet per minute — a typical mid-rise commercial building that takes a traditional crew 3–5 days can often be completed in 1–2 days. Exact timelines depend on building size, surface type, and access, confirmed during quote planning.
Can weather conditions impact the project schedule?
Yes. Operations follow FAA safety minimums for visibility and cloud clearance, plus manufacturer wind limits for our equipment (typically up to 18–20 mph). High winds, heavy rain, or storms may require rescheduling to maintain cleaning quality and safety. We monitor conditions closely and communicate any schedule changes as early as possible.
Can you apply sealant to protect the facade?
Yes — our drone platform supports aerial application of protective sealants (such as siloxane-based waterproofing) in addition to cleaning. This can often be scheduled as a follow-on service after facade cleaning, with the crew remaining safely on the ground throughout.
Need commercial facade or window cleaning in NYC or NJ?
Send us your building location, surface type, and timeline. We'll follow up with next steps for a quote.
Contact
Let's talk about your building.
Fill out the form and our team will follow up within one business day. You can also reach us directly:
- Emailinfo@spiderjetllc.com
- Phone+1 (908) 349-0588
- Instagram@spiderjetllc
